SEEPEX SGRTSE024AC SGRTSE 024 AC TSE CONTROLLER

SEEPEX SGRTSE024AC SGRTSE 024 AC TSE Controller
Industrial TSE control device for dry-running protection and stator temperature monitoring.

Category: Industrial Automation / Pump Protection Controller
Purpose: Monitors stator temperature and helps protect SEEPEX pumps from dry-running damage.

🌿 What It Is
The SEEPEX SGRTSE024AC SGRTSE 024 AC TSE Controller is an industrial temperature control device used as part of a dry-running protection system for SEEPEX pumps. It works with an NTC temperature sensor installed in the pump stator and monitors temperature increases that may indicate dry-running. When the preset shut-off temperature is reached, the controller switches relay contacts to stop the drive motor and trigger a fault signal.

✅ Key Benefits

• Helps protect SEEPEX pump stators from dry-running damage
• Monitors stator temperature via NTC sensor input
• Provides relay outputs for motor shutdown and fault signalling
• Suitable for installation in industrial control panels
• Supports manual reset after fault acknowledgement for safer operation

🧴 Use & Installation
Install the controller in a suitable control cabinet or panel according to the machine and SEEPEX documentation. Connect the 24 V AC supply, NTC temperature sensor, relay outputs, and reset circuit as required by the wiring diagram. Set the trip temperature according to the pumped medium and system requirements. Installation, wiring, and commissioning should only be performed by qualified electrical or automation personnel.

⚠️ Safety & Precautions

• For professional industrial use only.
• Disconnect power before installation, wiring, or maintenance.
• Use under technical supervision by qualified electricians or automation engineers.
• Verify voltage, relay load, sensor compatibility, and wiring before commissioning.
• Shield sensor cables and follow control cabinet wiring standards.
• Incorrect setup may cause pump damage, false alarms, or unsafe machine operation.

📦 Product Details
Form: TSE controller / temperature control device
Active Ingredients: Not applicable
Target Group: Industrial maintenance teams, pump service engineers, automation technicians
Pack Size: 1 pc
Model: SGRTSE024AC / SGRTSE 024 AC
Operating Voltage: 24 V AC
Input: NTC temperature sensor 10 kOhm at 25°C
Relay Output: 2 potential-free changeover contacts
Dimensions: Approx. 45 x 75 x 110 mm according to SEEPEX TSE technical data

🛒 Buy SEEPEX SGRTSE024AC SGRTSE 024 AC TSE Controller
Buy SEEPEX SGRTSE024AC TSE Controller at induparts for reliable industrial pump dry-running protection and stator temperature monitoring.

🔑 SEO Keywords:
SEEPEX SGRTSE024AC, SEEPEX SGRTSE 024 AC, SEEPEX TSE Controller, dry-running protection device, SEEPEX pump controller, stator temperature controller, industrial temperature controller, NTC sensor controller, pump protection relay, industrial automation spare part